Volume 4, Issue 3, September 2020, Page: 43-47
Investigating the Effects of Welding Processes on Tensile Stress and Strain Properties of Welded Mild Steel Plates Using Statistical Analysis
Oladebeye Dayo Hephzibah, Department of Mechanical Engineering Technology, Federal Polytechnic, Ado-Ekiti, Nigeria
Adejuyigbe Samuel Babatope, Mechatronics Engineering Department, Federal University, Oye-Ekiti, Nigeria
Olorunnishola Akim Abayomi Gideon, Department of Mechanical Engineering Technology, Federal Polytechnic, Ado-Ekiti, Nigeria
Received: Jun. 26, 2020;       Accepted: Jul. 13, 2020;       Published: Jul. 28, 2020
DOI: 10.11648/j.ajmme.20200403.11      View  328      Downloads  101
As test samples, mild steel plates with thicknesses of 0.5 mm, 0.6 mm, 0.7 mm, 0.8 mm, 0.9 mm, and 1.0 mm were made. After welding these test samples underwent Tensile Stress and strain tests with the Built Welding Robot and Manual Electric Arc Welding Machine. Both data collected from tensile stress and tensile stress were analyzed and the data produced from Electric Arc welding operations, the Robot welding operations and un-welded plates (control) were compared with one another. The analyses of the data obtained from the developed welding robot, manual electric arc welding and un-welded (control) mild steel plates of different thicknesses were carried out for tensile stress and strain. The descriptive statistics, ANOVA analysis, test of homogeneity of Variances and Post Hoc test (Least Significant Differences) were the statistical tools deployed using Statistical Package of Social Sciences (SPSS version 2016). The results showed that the robot welding sample produced gave the lowest tensile stress while the un-welded samples (CONTROL) gave the highest. The un-welded (CONTROL) samples gave the highest tensile strain values while the lowest was given by the developed robot welding samples. Finally, it was evident from the analyses results that the welding processes have significant impact on the tensile stress and strain properties of the welded mild steel plates and that good welding quality can be achieved more with the developed welding robot.
Welding Processes, Tensile Stress, Tensile Strain, Mild Steel, Statistical Analysis
To cite this article
Oladebeye Dayo Hephzibah, Adejuyigbe Samuel Babatope, Olorunnishola Akim Abayomi Gideon, Investigating the Effects of Welding Processes on Tensile Stress and Strain Properties of Welded Mild Steel Plates Using Statistical Analysis, American Journal of Mechanical and Materials Engineering. Vol. 4, No. 3, 2020, pp. 43-47. doi: 10.11648/j.ajmme.20200403.11
Copyright © 2020 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Radaj, D. and Sonsino, C. M. (1998). Fatigue assessment of welded joints by local approaches. Cambridge: Abington Publication.
Haibach, E. (1968). Fatigue Strength of Welded Joints from Viewpoint of Local Strain Measurement (in German). Report FB-77, Fraunhofer- Institut fu¨r Betriebsfestigkeit (LBF), Darmstadt.
Atztori, G. and Meneghetti, G. (2001). Fatigue strength of filled welded structural steels: finite elements, strain gauges and reality. International Journal of Fatigue, 23: 713–21.
van Wingerde, A. M., Packer, J. A. and Wardenier, J. (1995). Criteria for the fatigue assessment of hollow structural section connections. J Construct Steel Res; 35: 71–115.
Matoba, M., Kawasaki, T., Fujii, T. and Yamauchi, T. (1983). Evaluation of fatigue strength of welded structures—hull’s members, hollow section joints, piping and vessel joints. IIW-Doc. XIII-1082-83, International Institute of Welding.
Radaj, D. (1990). Design and analysis of fatigue-resistant welded structures. German Edition: DVS-Verlag, Du¨sseldorf 1985; English Edition: Abington Publ., Cambridge.
Petershagen, H., Fricke, W. and Massel, T. (1991). Application of the local approach to the fatigue strength assessment of welded structures in ships. IIW Doc. XIII-1409-91, International Institute of Welding.
Fricke, W. and Petershagen, H. (1992). Detail design of welded ship structures based on hot spot stresses. In: Caldwell JB, Ward G, editors. Practical design of ships and mobile units. Elsevier Science.
Niemi, E. (1995). Recommendations concerning stress determination for fatigue analysis of welded components. Cambridge: Abington Publication.
Huther, I., Gorski, S., Lieurade, H. P., Laborde, S. and Recho, N. (1999). Longitudinal non loaded welded joints geometrical stress approach. Welding in the World, 43 (3): 20–6.
Fricke, W. (2002). Recommended hot spot analysis procedure for structural details of ships and FPSOs based on round-robin FE analyses. International Journal of Offshore and Polar Engng, 12 (1): 40–7.
Niemi, E. and Tanskanen, P. (2000). Hot spot stress determination for welded edge gussets. Welding in the World; 44 (5): 31–7.
Fricke, W. and Bogdan, R. (2001). Determination of hot spot stress in structural members with in-plane notches using a coarse element mesh. IIW-Doc. XIII-1870-01, International Institute of Welding.
Niemi, E. (2001). Structural Stress Approach to Fatigue Analysis of Welded Components—Designer’s Guide. IIW- Doc. XIII-1819-00/XV-1090-01 (Final Draft), International Institute of Welding.
Dong, P. (2001). A structural stress definition and numerical implementation for fatigue analyses, International Journal of Fatigue, 23 (10): 865–76.
Dong, P., Hong, J. K. and Cao, Z. (2001). A mesh- insensitive structural stress procedure for fatigue evaluation of welded structures. IIW- Doc. XIII-1902-01/XV-1089- 01, International Institute of Welding.
Doerk, O. Fricke, W. and Weissenborn, C. (2003). Comparison of different calculation methods for structural stresses at welded joints, International Journal of Fatigue, 25: 359–369.
Kim, W. S., Kim, D. H, Lee, S. G. and Lee, Y. K. (2001). Fatigue strength of load carrying box fillet weldment in ship structure. In: Wu Y-S, Cui W-C, Zhou G-J, editors. Practical design of ships and other floating structures. Elsevier Science.
Paetzold, H. and Doerk, O. and Kierkegaard, H. (2001). Fatigue behaviour of different bracket connectons. In: Wu Y-S, Cui W-C, Zhou G-J, editors. Practical design of ships and other floating structures (Ed. Elsevier).
Oladebeye, D. H., Adejuyigbe, S. B. and Kareem, B. (2020). Metallurgical Analyses of Welding Using a Developed Mini-Robot. American Journal of Mechanical and Materials Engineering, 4 (2): 26-36.
Browse journals by subject