Volume 4, Issue 1, March 2020, Page: 1-11
Experimental Studies on Wear Resistance & Mechanical Properties of Aluminium Hybrid Composites (LM25/Al2O3/Graphite)
Aritakula Venugopal Rao, Department of Mechanical Engineering, R. V. College of Engineering, Bangalore, India
Bangalore Srinivasamurthy Suresh, Department of Mechanical Engineering, R. V. College of Engineering, Bangalore, India
Hebbale Narayanarao Narasimha Murthy, Department of Mechanical Engineering, R. V. College of Engineering, Bangalore, India
Munishamaiah Krishna, Department of Mechanical Engineering, R. V. College of Engineering, Bangalore, India
Hirehally Mahadevappa Somashekar, Department of Mechanical Engineering, Dr. Ambedkar Institute of Technology, Bangalore, India
Received: Jan. 14, 2020;       Accepted: Mar. 9, 2020;       Published: Mar. 18, 2020
DOI: 10.11648/j.ajmme.20200401.11      View  271      Downloads  115
Abstract
This paper involves the fabrication of hybrid Aluminium matrix composite samples of different compositions using Stir casting technique and testing the prepared hybrid composite test specimens for analysing their wear and mechanical properties. LM25 Al alloy was used as matrix material reinforced with constant 9 wt.% of Al2O3 with particle size of 6-23 μm and different wt. percentages of Graphite (particle size of 24-94 μm) as 3%, 4% and 5% to prepare hybrid composite samples of three different compositions. Mechanical properties, for examples, tensile strength, hardness, compression strength and impact strength were analysed for both base LM25 Al. alloy and composite samples. Wear loss and coefficient of friction of composite samples also were studied using Pin-on-disc apparatus. Microstructure images of the hybrid composite samples were examined to study dispersion of dual reinforcement particles in the matrix material, porosity and shrinkage cavities developed during the casting of the composite samples using Optical Microscope. Results revealed that Tensile strength, Hardness and Wear properties of the hybrid composite sample, having 9 wt.% of Al2O3 and 4 wt.% of Graphite particles, were found to be superior to those of re-cast LM25 Al. alloy. This study is mainly focussed on achieving the improved wear resistance and mechanical properties of the hybrid aluminium matrix composite materials for meeting the desired properties of the products by exploring newer compositions of the dual particles reinforced hybrid composites.
Keywords
LM25 Al Alloy, Al2O3, Graphite Particles, Aluminium Hybrid Composites, Mechanical Properties, Wear Resistance, Stir Casting Process
To cite this article
Aritakula Venugopal Rao, Bangalore Srinivasamurthy Suresh, Hebbale Narayanarao Narasimha Murthy, Munishamaiah Krishna, Hirehally Mahadevappa Somashekar, Experimental Studies on Wear Resistance & Mechanical Properties of Aluminium Hybrid Composites (LM25/Al2O3/Graphite), American Journal of Mechanical and Materials Engineering. Vol. 4, No. 1, 2020, pp. 1-11. doi: 10.11648/j.ajmme.20200401.11
Copyright
Copyright © 2020 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
Ahmad, K. R., Shamsul, J. B., Hussain, L. B. and Ahmad, Z. A. (2003), The Effect of Reinforcement Particle Size on the Microstructure and Hardness of Al/(Al2O3) composite Via P/M Route, Conference Paper.
[2]
Khandey, U. and Ghosh S. (2015), Optimization of turning process parameters for Al/SiC-MMC using Response Surface Methodology, ISME Journal of Manufacturing Sciences, Vol. 06, No. 2, pp. 08-18.
[3]
Xavior M. A. and Kumar, J. P. A. (2016), Machinability of Hybrid Metal Matrix Composite A Review, 13th Global Congress on Manufacturing and Management (GCMM).
[4]
Revanasidappa, M. D., Venkatesh, K. C., Naveen, C. R. (2016), Mechanical and Wear Behaviour of Al6061-SiC-Gr Hybrid Composites., National Conference on Advances in Mechanical Engineering Science (NCAMES), ISSN: 2231-5381, Page 376.
[5]
Mahalingegowda, H. B. and Mahesh, B. S. (2014), Mechanical and Wear Behaviour of Al60601-Al2O3 composites and AL6061-Al2O3-Gr Hybrid Composites, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 3, Issue 6.
[6]
Pitchayyapillai, G., Seenikannan, P., Raja, K. and Chandrasekaran, K. (2016), Al6061 Hybrid Metal Matrix Composite Reinforced with Alumina and Molybdenum Disulphide, Advances in Materials Science and Engineering, Article ID 6127624, 9 pages.
[7]
Venkateswarlu, M. (2018), Synthesis and Mechanical Characterization of duel particle reinforced hybrid composites, International Journal of Applied Engineering Research, ISSN 0973-4562, Volume 13, Number 2.
[8]
Manna, A., Bains, H. S. and Mahapatra, P. B. (2011), Experimental study on fabrication of Al–Al2O3/Grp.metal matrix composites, Journal of Composite Materials.
[9]
Suresh, S. M., Mishra, D., Srinivasan, A., Arunachalam, R. M. and Sasikumar, R. (2011), Production and Characterization of Micro and Nano Al2O3 parrticle-reinforced LM25 Aluminium Alloy Composites, ARPN Journal of Engineering and Applied Sciences, Vol. 6, No. 6.
[10]
Sajjadi, S. A., Ezatpour, H. R., Beygi, H. (2011), Microstructure and mechanical properties of Al–Al2O3 micro and nano composites fabricated by stir casting, Materials Science and Engineering A 528, 8765-8771.
[11]
Ted Guo, M. L. and Tsao, C. Y. A. (2000), Tribological behaviour of self-lubricating aluminium/SiC/graphite hybrid composites synthesized by the semi-solid powder densification method, Compos. Sci. Technol. 60, 65–74.
[12]
Yılmaz, O. and Buytoz, S. (2001), Abrasive wear of Al2O3-reinforced aluminium-based MMCs, Compos. Sci. Technol. 61, 2381–2392.
[13]
Miyajima, T. and Iwai, Y. (2003), Effects of reinforcements on sliding wear behaviour of aluminium matrix composites, Wear, Vol. 255 Nos 1-6, pp. 606-16.
[14]
Kok, M. (2005), Production and mechanical properties of Al2O3 particle-reinforced 2024 Aluminium alloy composites, Journal of Materials Processing Technology 161, 381–387.
[15]
Saheb, D. A. (2011), Aluminium Silcon Carbide and Aluminium Graphite Particulate Composites, ARPN Journal of Engineering and Applied Sciences Vol. 6, No. 10.
[16]
Radhika, N., Subramanian, R., Venkatprasat, S. and Anandavel, B. (2012), Dry Sliding Wear Behaviour of Aluminum/Alumina/Graphite Hybrid Metal Matrix Composites, Emerald Group Publishing Limited, Vol. 64, 359-366.
[17]
Suresh, R. and Kumar, M. P. (2013), Investigation of Tribological Behaviour and its relationship with Processing and Microstructures of Al 6061 Metal Matrix Composites, International Journal of Research in Engineering & Technology (IJRET) Vol. 1, Issue 2, 91-104.
[18]
Patil, R. S. and Motgi, B. S. (2013), A Study on Mechanical Properties of Fly Ash and Alumina Reinforced Aluminium Alloy (LM25) Composite, Journal of Mech. and Civil Engineering, vol. 7, pp. 41-46.
[19]
Baradeswaran, A. and Perumal, A. E. (2014), Study on mechanical and wear properties of Al7075/Al2O3/graphite hybrid composites, Journal of Composites, 56, 464–471.
[20]
Veigas, C. V., Nishan, N. S., Prakash A. S., Joshuva, N. (2016), Compression Behaviour of Al6061/Al2O3/Graphite Hybrid Composite, Material National Conference on Advances in Mechanical Engineering Science (NCAMES).
[21]
Archana, K. (2018), Analysis of Graphite reinforced Aluminium-6061 Metal Matrix Composite using Stir Casting Method, International Journal of Applied Engineering Research, Vol. 13, Number 6, pp. 189-193.
[22]
Hashim, J. A., Looney, L. and Hashmi, M. S. J. (1999), Metal matrix composites: production by the stir casting method, Journal of Materials Processing Technology. 92-93.
[23]
Bhandare, R. G. and Sonawane, P. M. (2014), Preparation of Aluminium Matrix Composite by using Stir Casting Method and its Characterization, International Journal of Current Engineering and Technology ISSN 2277 – 4106, Special Issue-3, (April 2014).
[24]
Deepakaravind, V., Gurubaran, B. K., Selvam, B., Kumar, T. S. (2015), Investigation of Mechanical properties on Nano Alumina and Nano Silicon Carbide in reinforced hybrid LM25 Composite, Inter National Conference on EETA, Journal of Chemical and Pharmaceutical Sciences.
[25]
Badiger, A., Krishan V. S. A., Sumandas, D., Vinayaka, H. L. (2016), Wear and Mechanical Properties Assessment of Al-Si/Al2O3 Nano Composites Processed by Stir Casting, International Journal of Research and Innovation in Applied Science (IJRIAS)|Vol. I, Issue IX.
[26]
Arunagiria, K. S. and Radhika, N. (2016), Studies on Adhesive Wear Characteristics of Heat Treated Aluminium LM25/AlB2 Composites, Tribology in Industry, Vol. 38, No. 3, 277-285.
[27]
Rohatgi, P. K., Dan, T. K., Arya, S. C. S. V. P., Das, S., Gupta, A. K., Prasad, B. K., Jha, A. K. (1990), Process for the manufacture of aluminum-graphite composite for automobile and engineering applications, United States Patent (19).
[28]
Ekambaram, S. (2015), Synthesis and Characterization of Aluminium Alloy AA6061-Alumina Metal Matrix Composite, International Journal of Current Engineering and Technology, 2347 – 5161, Vol. 5, No. 5.
[29]
Sameer, M. D. and Birru, A. K. (2016), Experimental Investigations on Mech. behaviour of Al2O3 and Graphite reinforced Aluminium Hybrid Metal Composites by Stir Casting Process, International Journal of Scientific & Engineering Research, Volume 7, Issue 6, 37 ISSN 2229-5518.
[30]
Bihari, B. and Singh, A. K. (2017), An Overview on Different Processing Parameters in Particulate Reinforced Metal Matrix Composite Fabricated by Stir Casting Process, Int. Journal of Engineering Research and Application, ISSN: 2248-9622, Vol. 7, Issue 1, (Part -3), pp. 42-48.
[31]
Borina, D. and Odenbach, S. (2013), Viscosity of liquid metal suspensions -experimental approaches and open issues, The European Physical Journal Special Topics.
[32]
Sharma, P., Paliwaa, K., Garg, R. K., Sharma, S., Khanduja, D. (2017), A study on wear behaviour of Al/6101/graphite composites, Journal of Asian Ceramic Societies 5, 42–48.
[33]
Aatthisugan, Razal Rose, A., Iruthayaraj, R., Palani, S., Shanmugan, S. (2017), Wear and Mechanical properties of Aluminium hybrid composite (Al2024/Al2O3/Graphite) fabricated by powder metallurgy, International Journal of Pure and Applied Mathematics, Volume 116, No. 23, 231-236.
Browse journals by subject